Tổng quan về máy tính bảng Chainway P80
Chainway P80 là máy tính bảng đọc thẻ RFID dựa trên nền tảng Android 9.0, có cấu hình mạnh mẽ và nhiều tùy chọn tính năng phong phú. Thiết bị này cũng có thiết kế đặc biệt cho môi trường công nghiệp vì thế nó có thể triển khai cho nhiều ứng dụng khác nhau như kho bãi, bán lẻ, logistics hay hệ thống vận chuyển
Chainway P80 sở hữu hiệu năng mượt mà, cấu hình mạnh mẽ
Được sở hữu bộ xử lý Qualcomm Octa-core và bộ nhớ RAM tùy chọn lên đến 4GB thì Chainway P80 đem lại hiệu năng sử dụng thiết bị cực kỳ mượt mà, khách hàng có thể thoải mái mở nhiều tác vụ lên và sử dụng mà không lo máy bị giật, lag. Bộ nhớ trong của máy cũng được tùy chọn nâng cấp lên tới 64GB, giúp cho người dùng thoải mái lưu trữ dữ liệu. Với cục pin Li-ion dung lượng 8000 mAh thì Chainway P80 hoàn toàn có thể mang đi sử dụng cả ngày mà không lo hết pin, máy cũng có hỗ trợ sạc nhanh để đảm bảo công việc của người dùng không bị ngắt quãng quá lâu. Màn hình của Chainway P80 có kích thước 8-inch với tấm nền IPS, độ phân giải là fullHD 1920×1200, mang lại hình ảnh rõ nét cho người sử dụng.
Quét mã vạch chính xác
Máy tính bảng đọc thẻ RFID Chainway P80 được trang bị máy quét mã vạch của Zebra mang lại khả năng chụp mã vạch 1D và 2D cực nhanh kể cả các loại mã vạch bị nhàu nát hay bị mờ, xấu. Máy quét mã vạch của P80 có độ rộng quét lớn và khả năng quét xa, đem lại sự linh hoạt và dễ triển khai cho nhiều ứng dụng, giải pháp khác nhau.
Chainway P80 có khả năng tích hợp công nghệ RFID UHF đa dạng
Đây là tính năng mở rộng của Chainway P80, có tất cả 3 cách khác nhau để tích hợp mô đun RFID UHF, dựa vào ứng dụng và khoảng cách đọc mà giải pháp RFID của người dùng cần có để lựa chọn mô đun phù hợp. Được trang bị nền tảng công nghệ của Impinj, tốc độ đọc thẻ có thể lên đến 900 thẻ mỗi giây, biến Chainway P80 trở thành một đầu đọc thẻ RFID di động chuyên nghiệp.
Thông số kỹ thuật
Physical Characteristics | |
Dimensions | 250.8 x 152.0 x 15.0 mm / 9.87 x 5.98 x 0.59 in. (for standard version) |
Weight | 700 g / 24.7 oz. (for standard version) |
Display | 8” IPS LTPS 1920 x 1200 / IPS LTPS 1280 x 800 |
Touch Panel | Corning Gorilla Glass, multi-touch panel, gloves and wet hands supported |
Power | Main battery: Li-ion, rechargeable, 8000 mAh Standby: over 500 hours Continuous use: over 10 hours ( depending on user environment ) Charging time: 5-7 hours ( with standard AC adaptor and USB cable ) |
Notification | Sound, LED indicator |
Expansion Slot | 1 slot for SIM card, 1 slot for SIM / TF card, Optional dual PSAM card slots |
Interfaces | USB 2.0 Type-C, OTG |
Audio | 1 microphone;1 speaker;receiver |
Keypad | 1 front key , 1 volume key , 1 power key , direction key (optional) |
Sensors | Gravity sensor, gyroscope, accelerometer sensor |
User Environment | |
Operating Temp. | -4 °F to 122 °F / -20 °C to 50 °C |
Storage Temp. | -40 °F to 158 °F / -40 °C to 70 °C |
Humidity | 5% RH – 95% RH non condensing |
Drop Specification | Multiple 1.5 m / 4.9 ft. drops (at least 20 times) to the concrete across the operating temperature range |
Tumble Specification | 500 x 0.5 m / 1.64 ft. falls at room temperature |
Sealing | IP65 per IEC sealing specifications |
ESD | ±15 KV air discharge, ±8 KV conductive discharge |
Developing Environment | |
Operating System | Android 9.0; GMS, 90-day security updates, Android Enterprise, Zero-Touch,FOTA, Soti MobiControl, SafeUEM supported |
SDK | Chainway Software Development Kit |
Language | Java |
Tool | Eclipse / Android Studio |
Performance | |
CPU | Octa-core 1.8GHz ; GMS&AER |
RAM+ROM | 3 GB + 32 GB 4 GB + 64 GB (optional) |
Expansion | Supports up to 256GB Micro SD (TF) card |
UHF1 | |
Engine | CM710-1 module based on Impinj E710 |
Frequency | 865-868 MHz / 920-925 MHz / 902-928 MHz |
Protocol | EPC C1 GEN2 / ISO18000-6C |
Antenna | Circular polarization (3 dBi) |
Power | 1W ( 30dBm, +5dBm to +30dBm adjustable ) 2W Optional ( 33dBm, for Latin America, etc. ) |
Max Read Range | Up to 10 m (open outdoors, Impinj MR6 tag) |
Fastest Read Rate | 900+ tags/sec |
Note | * Ranges and rates depend on tags and environment * This function is optional |
UHF2 | |
Engine | CM310-1 module based on Impinj E310 |
Frequency | 865-868 MHz / 920-925 MHz / 902-928 MHz |
Protocol | EPC C1 GEN2 / ISO18000-6C |
Antenna | 0 dBi |
Power | 1W ( 30dBm, +5dBm to +30dBm adjustable ) |
Max Read Range | Up to 10 m (open outdoors, Impinj MR6 tag) |
Fastest Read Rate | 30 cm |
Note | * Built-in UHF, optional * Ranges and rates depend on tags and environment |
Communication | |
WLAN | Support 802.11 a/b/g/n/ac/d/e/h/i/k/r/v,2.4G/5G dual-band, IPV4,IPV6; Fast roaming: PMKID caching, 802.11r, OKC; Operating Channels: 2.4G(channel 1~13), 5G(channel36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132, 136,140,144,149,153,157,161,165),Depends on local regulations; Security and Encryption: WEP,WPA/WPA2-PSK(TKIP and AES),WAPI- PSK—EAP-TTLS,EAP-TLS, PEAP-MSCHAPv2, PEAP-LTS,PEAP-GTC,etc. |
WWAN (Europe, Asia) | 2G: 850/900/1800/1900MHz, GPRS, EDGE 3G: CDMA EVDO: BC0 TD-SCDMA: B34/B39 WCDMA: B1/B5/B8 4G: TDD-LTE: B34/B38/B39/B40/B41 FDD-LTE: B1/B3/B5/B7/B8/B20 |
WWAN (America) | 3G: WCDMA: B2/B4/B5 4G: FDD-LTE: B2/B4/B5/B7/B12/B13/B17/B28A/B28B |
WWAN (Others) | Depending on the country’s ISP
Note: |
Vo-LTE | Support Vo-LTE HD video voice call |
Bluetooth | Bluetooth 4.2/4.1+HS/4.0/3.0+HS/2.1+EDR |
GNSS | GPS/AGPS, GLONASS, BeiDou,Galileo,internal antenna |
Note | *P80 models being manufactured for Turkish Market, do not include Voice Call (Phone Call) function. WAN module included on those models only support DATA transfer. |
Fingerprint 1 | |
Sensor | TCS1 |
Sensing Area (mm) | 12.8 × 18.0 |
Resolution (dpi) | 508 dpi, 8-bit greylevel |
Certifications | FIPS 201, STQC |
Format Extraction | ISO 19794, WSQ, ANSI 378, JPEG2000 |
Security | AES, DES key encryption of the host communication channel |
Fake Finger Detection | Support by SDK |
Note | * This function is optional |
Fingerprint 2 | |
Sensor | TLK1NC02 |
Sensing Area (mm) | 14.0 X 22.0 |
Resolution (dpi) | 508dpi, 256-bit greylevel |
Certifications | FIPS 201, FBI |
Format Extraction | ISO19794, WSQ, ANSI 378, JPEG2000 |
Security | AES, DES key encryption of the host communication channel |
Fake Finger Detection | Support by SDK |
Note | * This function is optional |
Fingerprint 3 | |
Sensor | Optical Morpho CBM-E3 |
Sensing Area (mm) | 14 x 22 |
Resolution (dpi) | 500 dpi, 256 greylevel |
Certifications | FIPS PIV IQS / ISO 19794-4, MINEX & FIPS 201 complaint, STQC |
Format Extraction | ISO 19794-2/4, WSQ, ANSI 378, etc |
Security | FIPS 140-2 level 2, multiple security methods available, including image and templates encryption, template signature, secure tunneling, etc. |
Fake Finger Detection | Latex, GeLatin, Plasticine, Kapton, Transparent Film, Silicone, Rubber, Play-doh, Graphite Or Paper |
Note | * This function is optional |
PSAM | |
Protocol | ISO7816 |
Slots | 2 PSAM card slots |
Note | * This function is optional |
Camera | |
Camera | 13 MP Autofocus with flash |
Front Camera | 8 MP |
NFC | |
Frequency | 13.56 MHz |
Protocol | ISO14443A/B, ISO15693, NFC-IP1, NFC-IP2, etc. |
Chips | M1 card (S50, S70) , CPU card, NFC tags, etc. |
Range | 2-4 cm |
Note | * This function is optional |
RFIDSTORE –
Great!!